Setting Up Epoxy Coating To Your Concrete Floor

On July 30, 2009 in Uncategorized

Even in case you buy cheap concrete paint, the painting system remains the same. Setting up epoxy covering to your garage surface can be enclosed in three major steps. In going all the way through this garage coating guide, do not overlook to bear protective gloves and goggles.

Allow us to firstly deal with the garage walls. Stick synthetic cover on the walls up to the height to which you desire the epoxy painted. In case you only like to apply epoxy on the floor, then attach the synthetic sheeting on the wall adjacent to the surface. Then brush the entire area and get rid of all grime and dust. Do this systematically, and do not disregard to also clear out the corners and seams.

As soon as we are certain that the garage floor is dust-free, it’s time to etch the flooring. We mix an etching solution with water in a watering container. Go along the manufacturer’s instructions on the etching mixture, and don’t overlook to bear protective gloves, rubber boots, and safety goggles.

Etching is appropriate to new or bare floors. There is no need to etch a painted surface. You just ought to scrape the cover with a flooring maintainer and a light-sanding pad. Then brush and scrub the flooring with a bristle broom and an all-purpose cleaner. Rinse the flooring and then let it dry for 4 hours or more. Now you need to buy epoxy floors and your job is all finished.

Comments (0)